Freshen up your space with an elegant DIY lamp.



ap-rachel-1-1
Have a pile of derelict boxes hanging around? Upcycled cardboard lanterns are the perfect way to transform trash into imaginative home decor that you can enjoy all year 'round. These simple lanterns are a breeze to make and add a cozy glow to any space. Any cardboard box will do, so have fun mixing shapes and sizes to make a dynamic display. You will need: Large cardboard box Box cutter or craft knife Tissue paper Hot glue gun Metal straight edge Gold spray paint Twine LED lights Duck tape Wooden dowel Paper lantern template (Download PDF here)
hmc-lantern-001
Take a cardboard box and cut so that the entire box lays flat and there's a large surface to work with. Use the template to measure and draw each piece of the lantern on the flat cardboard. Cut out the lantern design using a box cutter or craft knife. You should have 4 of Piece A (side panels), 8 of Piece B (triangles), and 1 of Piece C (top panel).
hmc-lantern-002
To score the sides of the box, take your craft knife and apply half pressure along the middle corners that are going to be folded to create the lantern shape. Fold the scored corners of Piece A and hot glue all the open sides together. Hot glue the triangles (Piece B) to the main body of the lantern. Cut out the top piece, but wait to attach it until the end.
hmc-lantern-003
When all pieces are connected, prime the cardboard with white spray paint. Once the coat is dry, add a top coat using metallic gold spray paint. Don’t forget to paint the top piece, too!
hmc-lantern-004
Once the paint has dried, take the colored tissue paper of your choice and cut enough so that it will cover the window shapes of the lanterns. Reach inside the lantern and hot glue the tissue paper to the open windows.
hmc-lantern-005
We used an under-cabinet LED strip to light our lantern, but any battery-operated LED light will work. To create the light fixture for your lantern, tape twine securely to the back of the LED strip, then hang the light in the lantern to measure how long you want your twine. Cut the twine, leaving about 1 inch extra. Pull the twine through the hole in the top piece of your lantern and tie the other end to a popsicle stick or wooden dowel.
hmc-lantern-006
Finally, place the LED light into the lantern and secure the lid tightly on top.
etsy_hc_paperlantern_final3
Now sit back and enjoy the beautiful glow of your handmade cardboard lantern!  All photographs by Handmade Charlotte.